● Poly-Cotton blend Canvas fabric for graphics art & photo art reproduction
● Microporous inkjet coating for high quality sharp and vibrant prints
● Metallic finish offers metallic shine for special effect and making the graphics more lively and appealing
● Water-resistant prints & Crack free properties helps in Varnish OverPrint’s & Crack free mounting of graphics
● Poly-Cotton thick fabric base provides high physical strength during mounting on frames

Digital art reproduction & photo enlargements, theatre and trade show backdrops, framed pictures, wall décor and creative graphics with special effect due to silver metallic sheen.

Compatibility
● This media is compatible with original inks of the most aqueous dye & pigment, HP Latex & UV printers. Please consult the ink/printer manufacturer for technical advice if required.
● Pre-test the compatibility of the inks with the media before commencing actual production.
● To achieve best possible print quality, please make sure that correct ICC profiles and heater settings are used. For further assistance, please contact our HelpDesk.

Durability of Media
● The durability of the printed image is dependent on the fading characteristics of the inks used.
● If the printed graphics are likely to be exposed to corrosive liquids, smoke, fumes or a highly polluted atmosphere or if there is a likelihood of scratching or friction while mounting on frames or cleaning after mounting, it is strongly recommended that a UV stabilised varnish is used to protect the prints.

● It is recommended to condition the media in the normal printing environment for 24 hours before printing.
● While printing, care must be taken to modify the print file to suit the ink limit of the media. For best results, please ensure proper colour calibration.
● The media should be printed on within the specified ink limit. Exceeding the ink limit can lead to longer drying time, bleeding and lower resolution.
● Printed media should be thoroughly dried before rolling-up for transport to avoid ink smearing.
● Printed media can be protected using a clear UV stabilised varnish. Pre-test the compatibility of the varnish with the printed media prior to use. Please allow adequate drying time of the print before varnishing.
● A fresh pair of cotton gloves should be used while handling the bare media to avoid sweat, grease and oil transfer on to the media that could interfere with the print quality.
● When not in use, the media should be stored in its original packing in a vertical position.