• Superior white base for wide colour gamut and deep rich colours
• PET film base provides tear resistance & thermal stability for long term durability
• Special coating for uniform light diffusion and excellent backlit effect
• Non-Tear and lay flat properties for hassle free mounting and framing
• Anti-skid and anti-static back coating provides superior grip while printing
• PVC-free media for eco-friendly printing

Backlit boxes, LED frames, POP & POS displays, glow signs and many more.

• Condition the media in the normal printing environment for 24 hours before printing
• Print the media within the specified ink Exceeding the ink limit can lead to longer drying time, bleeding and lower resolution. For best results, use colour calibration.
• Printed media should be thoroughly dried before rolling-up for transport to avoid ink
• Post-processing for hem is not required. If necessary, banner tape is preferred to sewing. Grommets should be placed through 2 layers in the
• Corner grommets should be placed where the vertical and horizontal hemlines meet, so that they pass through 4 layers of the media

• Use a pair of cotton gloves to handle the media and protect it from sweat, grease &
• When not in use, store the media in original packing

• The durability of the printed image is dependent on the fading characteristics of the inks
• To protect the printed graphics from harsh atmosphere, scratching or friction we recommend using a UV stabilized, cold, pressure sensitive lamination film.
• Check the compatibility of the lamination film with the printed
• Allow 8 hours of drying time of the print before lamination