• Versatile polyester fabric base for wide range of backlit applications
• Special coating for uniform light diffusionBright white finish offers superior contrast & wide colour gamut
• Strong fabric base provides high physical strength during mounting or framing
• Water resistance feature best suited for humid & outdoor conditions

Backlit boxes, Silicon edge frames, Scrollers and other backlit applications

• It is recommended to condition the media in the normal printing environment for 24 hours before printing.
• While printing, care must be taken to modify the print file to suit the ink limit of the media. For best results, please ensure proper colour calibration.
• The media should be printed on within the specified ink Exceeding the ink limit can lead to longer drying time, bleeding and lower resolution.
• Printed media should be thoroughly dried before rolling-up for transport to avoid ink

• A fresh pair of cotton gloves should be used while handling the bare media to avoid sweat, grease and oil transfer on to the media that could interfere with the print quality.
• When not in use, the media should be stored in its original packing in a vertical

• The durability of the printed image is dependent on the fading characteristics of the inks
• The performance of the media will be hampered on old/obsolete/discontinued printing devices due to wear & tear, lack of support from hardware vendors. Our current products are suited to work on the latest models keeping in line with recent advances in printing technologies.